Mc-12 Set Record Input (Mc-12) - Lexicon MC-12 V2.0 - SERIAL COMMUNICATIONS PROTOCOL DEFINITION REV 1-3 Manual

Lexicon, Inc.
MC-12 Serial Communications Protocol
7.3.50.1 Command Packet Description
Application Header:
Command
Data Count
Application Data:
Data[0]
7.3.50.2 Data Description
EffectId:
Data Type:
Definition/Conversion:
7.3.50.3 MC-12 Response
The MC-12 will load the desired effect.
7.3.50.4 Data Validation
If a value is passed that exceeds the maximum value of that parameter the MC-12 will ignore the command
and transmit a NAK command with an error code DC_INVALID_DATA.

7.3.51 MC-12 Set Record Input (MC-12)

Sets the Record input.
7.3.51.1 Command Packet Description
Application Header:
Command
Data Count
Application Data:
Data[0]
7.3.51.2 Data Description
InputId:
Data Type:
Description/Conversion:
7.3.51.3 MC-12 Response:
If the Input Id is a valid MC-12 input then the MC-12 will make the request Input the active record input.
7.3.51.4 Data Validation:
The InputId must be a valid Input Id. If it is not the MC-12 will respond with a NAK packet and error code
DC_INVALID_INPUT. If the input is assigned the MC-12 will respond with an ACK Packet.
© 2002 Lexicon, Inc. All rights reserved.
MC_CMD_SET_EFFECT
1
EffectId
Unsigned 8 bit integer
Appendix I MC-1 to MC-12 Effect ID
MC_CMD_SET_REC_INPUT
1
InputId
Unsigned 8 bit Integer
Appendix F MC-12 Input Ids
Printed on: 10/10/02
0x43
0x01
nn
Map.
0x44
0x01
nn
48 of 92