Table of Contents
Advertisement
Lexicon, Inc.
MC-12 Serial Communications Protocol
7.3.3.1 Command Packet Description
7.3.3.2 Data Description
KeyCode:
Data Type:
Valid Values:
7.3.3.3 MC-12 Response
The KeyCode is processed as a valid IR code. No acknowledgment will be sent from MC-12.
7.3.3.4 Data Validation
The KeyCode data will be verified as a legal IR code. If the Code is not valid the MC-12 will not respond.
7.3.4 Get Unit Configuration (MC-12, MC-1)
Request to MC-12 for its current unit configuration.
This command is supported for backward compatibility. MC-12 users should use the command described
in
7.3.39
(MC-12_Get_Unit_Configuration). MC-12 will respond with "Unit Configuration Packet". The
HOST should use this information to determine if any information saved by the HOST is current.
7.3.4.1 Command Packet Description
Application Header:
Command
Data Count
Application Data:
© 2002 Lexicon, Inc. All rights reserved.
Application Header:
Command
DC_CMD_IR
Data Count
1
Application Data:
Data[0]
KeyCode
Unsigned 8 bit integer
Appendix C MC-1 IR-Codes
DC_CMD_GET_CONFIG
0
N/A
Printed on: 10/10/02
0x14
0x01
nn
0x15
0x00
15 of 92
Advertisement
Table of Contents
