Table Of Contents - Lexicon MC-12 V2.0 - SERIAL COMMUNICATIONS PROTOCOL DEFINITION REV 1-3 Manual

Lexicon, Inc.
MC-12 Serial Communications Protocol
1 Documents
1.1 Change List
2 Definitions
2.1 Protocol Version Cross-reference
3 Abbreviations
4 General Description
5 Physical Layer
DB-9 RS232 Connector
5.2 Serial Port Driver
5.3 Errors
5.4 MC-12 Receive Buffer
5.5 MC-12 Hardware Verification (V1.10, Not Supported in MC-12 V1.00, V1.01)
6 Data Link Layer
6.1 Errors
7 Application Layer
7.1 MC-12 Asynchronous Notification Packets
7.1.1 Wakeup Notification (MC-12, MC-1)
7.1.2 Sleep Notification (MC-12, MC-1)
7.1.3 Front Panel Display (MC-12, MC-1)
7.1.4 MC-1 Parameter Change (MC-12, MC-1)
7.1.5 MC-12 Parameter Notification by Id (MC-12)
7.2 Acknowledgment Packets
7.2.1 Acknowledge (MC-12, MC-1)
7.2.2 No Acknowledge (MC-12, MC-1)
7.3 Host Initiated Command Packets
7.3.1 Reset Unit (MC-12, MC-1)
7.3.2 Restore (MC-12, MC-1)
7.3.3 MC-1 Send IR Command (MC-12, MC-1)
7.3.4 Get Unit Configuration (MC-12, MC-1)
7.3.5 Get System Status (MC-12, MC-1)
7.3.6 Get Zone 2 Status (MC-12, MC-1)
7.3.7 Get System Parameter Definition (MC-1)
7.3.8 Get System Parameter Values (MC-1)
7.3.9 Get Effect Definition by Id (MC-1)
7.3.10 Get Effect Parameter Definition (MC-1)
7.3.11 Get Effect Parameter Values (MC-1)
7.3.12 Get Custom Name (MC-12, MC-1)
7.3.13 Get Input Name by Id (MC-12, MC-1)
7.3.14 Get FPD Control Registers (MC-1)
7.3.15 Set System Parameter Values (MC-1)
7.3.16 Set Effect Parameter Values (MC-1)
7.3.17 Set Effect Name by Effect Id (MC-1)
7.3.18 Set System Volume (MC-12, MC-1)
7.3.19 Set Main Balance (MC-12, MC-1)
7.3.20 Set Front/Back Balance (MC-12, MC-1)
7.3.21 Set Active Effect by Id (MC-12, MC-1)
7.3.22 Set Record Input (MC-12, MC-1)
© 2002 Lexicon, Inc. All rights reserved.
Printed on: 10/10/02
6
6
6
6
6
7
8
8
8
8
8
8
9
9
10
10
10
10
10
11
12
13
13
13
14
14
14
14
15
18
20
21
21
21
21
21
21
22
22
23
23
23
23
23
24
25
25
3 of 92