Acknowledgment Packets; Acknowledge (Mc-12, Mc-1); No Acknowledge (Mc-12, Mc-1) - Lexicon MC-12 V2.0 - SERIAL COMMUNICATIONS PROTOCOL DEFINITION REV 1-3 Manual

Lexicon, Inc.
MC-12 Serial Communications Protocol
7.1.5.1 Command Packet Description
Application Header:
Command
Data Count
Application Data:
Data[0]
Data[1]
Data[2]
Data[3-23]
7.1.5.2 Data Description
Same as Paragraph 7.3.37.2
7.1.5.3 HOST Response
The MC-12 does not expect any response from the HOST.

7.2 Acknowledgment Packets

Acknowledge and No Acknowledge packets are used to communicate transmission, packet and data
validation status. Both the HOST and MC-12 can transmit and receive these packets.

7.2.1 Acknowledge (MC-12, MC-1)

7.2.1.1 Packet Description
7.2.1.2 Data Description
Command:
DataType:

7.2.2 No Acknowledge (MC-12, MC-1)

7.2.2.1 Packet Description
7.2.2.2 Data Description
© 2002 Lexicon, Inc. All rights reserved.
MC_PARAM_NOTIFICATION_BY_ID
24
ParamId(LSB)
ParamId(MSB)
ParamType
Value[0 -20]
Application Header:
Command
Data Count
Application Data:
Data[0]
Valid MC-12 command as defined in
Application Header:
Command DC_NACK
Data Count
Application Data:
Data[0] Command
Data[1] ErrorCode
DC_ACK 0xE0
10x01
Command nn
Appendix A Command
0xE1
20x02
nn
nn
Printed on: 10/10/02
0x05
0x18
nn
nn
nn
nn nn
nn...
Codes.
13 of 92