Get Input Name By Id (Mc-12, Mc-1); Get Fpd Control Registers (Mc-1) - Lexicon MC-12 V2.0 - SERIAL COMMUNICATIONS PROTOCOL DEFINITION REV 1-3 Manual

Lexicon, Inc.
MC-12 Serial Communications Protocol
Max Length:

7.3.13 Get Input Name by Id (MC-12, MC-1)

This command is a request to MC-12 for the custom input name. MC-12 will respond with "Input Name
Packet".
This command has been maintained for backward compatibility with MC-1. In order to maintain backward
compatibility, the MC-12 Parameters have been mapped to the MC-1 parameters as described in each Data
Description. MC-12 users should be using the command described in
(MC12_Get_Input_Name_By_Id).
7.3.13.1 Command Packet Description
Application Header:
Command DC_CMD_GET_INPUT_NAME
Data Count 1
Application Data:
Data[0]
7.3.13.2 Data Description
InputId:
Data Type:
Definition/Conversion:
7.3.13.3 Data Validation:
The InputId must be a valid Input number. If it is not the MC-12 will respond with a NAK packet and error
code DC_INVALID_INPUT.
7.3.13.4 Input Name Response Packet
Application Header:
Command
Data Count
Application Data:
Data[0]
Data[1]- Data[DataCount-1] InputName
7.3.13.5 Data Description
InputId:
Data Type:
Definition/Conversion:
InputName:
Data Type:
Max Length:

7.3.14 Get FPD Control Registers (MC-1)

This command is not supported by the MC-12.
© 2002 Lexicon, Inc. All rights reserved.
CUSTOM_NAME_LENGTH defined in
InputId
Unsigned 8 bit Integer
Appendix F MC-12 Input Ids
DC_RESP_INPUT_NAME
Number of Characters in
InputName + 2
InputId
Unsigned 8 bit Integer
Appendix F MC-12 Input Ids
Null (0x00) terminated ASCII character string.
INPUT_NAME_LENGTH defined in
Printed on: 10/10/02
Appendix G Protocol Constants.
7.3.54
0x2D
0x01
nn
0x8A
Nn
Nn
ch ch ch ... 0x00
Appendix G Protocol Constants.
22 of 92