Command Matrix - Lexicon MC-12 - REV 4 User Manual

Basic Operation
2
3
2-14

COMMAND MATRIX

1
The command matrix describes the commands remote control buttons perform when each
command bank is active.
Button Main Zone
1 Activates and deactivates standby mode when the MC-12 rear panel power switch is in the on position.
When standby mode is activated, pressing the standby button deactivates standby mode and activates
4
the MC-12, including all zones that were activated during the previous operating session. When standby
mode is deactivated, pressing the standby button activates standby mode and deactivates the MC-12.
The red front panel standby button LED lights to indicate that standby mode is activated.
Note: Power is still supplied to the MC-12 when standby mode is activated.
2 Activates the remote control back-light, illuminating remote control buttons making them more visible in
the dark. The back-light also illuminates whenever a remote control button is pressed. Once illuminated,
the back-light remains on for about 5 seconds before extinguishing.
3 Activates the Main Zone command bank, which includes commands that control the Main Zone.
Activates the Zone 2 command bank, which includes commands that control the Zone 2.
Activates the Record Zone command bank, which includes commands that control the Record and
Main Zones.
Activates the Shift command bank, which includes commands that control the Main Zone.
4 Selects the DVD1 input
for the Main Zone.
Selects the DVD2 input
for the Main Zone.
Selects the LD input for
the Main Zone.
Selects the TV input for
the Main Zone.
Zone 2 Record Zone
Selects the DVD1 input Selects the DVD1 input
for Zone 2. for the Record Zone.
Selects the DVD2 input Selects the DVD2 input
for Zone 2. for the Record Zone.
Selects the LD input for Selects the LD input for
Zone 2. the Record Zone.
Selects the TV input for Selects the TV input for
Zone 2. the Record Zone.
Lexicon
Shift
Deactivates the Main
Zone.
Deactivates Zone 2.
Deactivates the
Record Zone.
Sets the AUDIO
CONTROLS menu
LOUDNESS parameter
to ON.