Volume-Control Setup - Lexicon MC-12 - REV 4 User Manual

Setup

VOLUME-CONTROL SETUP

SETUP VOLUME CONTROLS
Opens the VOLUME CONTROL SETUP menu, to configure the Main
Zone, Zone 2, and Record Zone volume levels.
SETUP
MAIN MENU
MODE ADJUST INPUTS
AUDIO CONTROLS SPEAKERS
REAR PANEL CONFIG
SETUP
DISPLAYS
VOLUME CONTROLS
TRIGGERS
LOCK OPTIONS
LIVE! CALIBRATION
VOLUME CONTROLS SETUP
Parameter Default Setting
MAIN PWR ON -30dB
MUTE LEVEL -30dB
ZONE PWR ON -30dB
REC PWR ON -30dB
MAX VOLUME +12dB
MAIN PWR ON
SETUP VOLUME CONTROLS MAIN PWR ON
Selects the volume level at which the Main Zone activates. When a
value is selected, the MC-12 automatically sets Main Zone volume
3-66
VOLUME CONTROL SETUP
MAIN PWR ON -30dB
MUTE LEVEL -30dB
ZONE PWR ON -30dB
REC PWR ON -30dB
MAX VOLUME +12dB
LAST LVL, -80 to +12dB
-10dB
-20dB
-30dB
-40dB
FULL MUTE
Possible Setting
LAST LVL, -80 to +12dB
-10dB, -20dB, -30dB, -40dB,
FULL MUTE
LAST LVL, -80 to +12dB
LAST LVL, -80 to +12dB
-80 to +12dB
LAST LVL, -80 to +12dB
level to the selected value when the Main Zone is activated. When
LAST LVL is selected, the MC-12 sets Main Zone volume level to the
last volume level that was selected in the Main Zone during the
previous operating session.
MUTE LEVEL
-10dB, -20dB, -30dB, -40dB, FULL MUTE
SETUP VOLUME CONTROLS MUTE LEVEL
Determines the amount of attenuation that occurs in the Main
Zone when the Mute button is pressed. When a value is selected,
Main Zone volume level is attenuated to the selected value when
the Mute button is pressed. When FULL MUTE is selected, Main
Zone volume level is fully attenuated when the Mute button is
pressed.
ZONE PWR ON
SETUP VOLUME CONTROLS ZONE PWR ON
Selects the volume level at which Zone 2 activates. When a value is
selected, the MC-12 automatically sets Zone 2 volume level to the
selected value when Zone 2 is activated. When LAST LVL is selected,
the MC-12 sets Zone 2 volume level to the last volume level that
was selected in Zone 2 during the previous operating session.
REC PWR ON
SETUP VOLUME CONTROLS REC PWR ON
Selects the volume level at which the Record Zone activates. When
a value is selected, the MC-12 automatically sets Record Zone
volume level to the selected value when the Record Zone is
activated. When LAST LVL is selected, the MC-12 sets Record Zone
Lexicon
LAST LVL, -80 to +12dB
LAST LVL, -80 to +12dB