Lexicon LXP-15-II Owner's Manual page 60

LXP-15 II Owner's Manual
MIDI Harmonizer
Tempo Controlled Reverb
4-22
• Use the Pitch/Delay algorithm
• The MIDI keyboard should not be the audio source. In this example it would
serve as a controller only. Audio from another source (microphone, tape
track, etc.). Harmony is determined by playing the MIDI keyboard.
• Harmony is relative to middle C (note 60).
• Mod Whl control of feedback determines the depth of cascade effects.
• MIDI Volume pedal control of Delay L changes the cascade effect from
chords to arpeggios.
Pitch Intervl
On Unison
Predely PdlyFdbk
0 s 0%
Src 1 Thresh1
LastNote 60
Src 2 Thresh2
Mod Whl 127
Src 3 Thresh3
Volume 0
NOTE: You may have to play with the Scale adjustment a bit. Start with
Scale set to "0" and turn ADJUST one click at a time until the value changes
to "1".
• Use the Delay/Reverb algorithm.
• Tempo control of Decay tailors decay time to tempo. The faster the tempo,
the shorter the decay time. The settings here will modify decay time through
a wide range of tempos (50BPM-240BPM).
Decay Treble
6.1s 6.94kHz
Src 1 Thresh1
Tempo 127
Parameter Settings
PchFine HiCut
0 don't care
Delay L Feedback
0 s 75%
Patch Settings
Dest 1 Scale 1
Intervl 100%
Dest 2 Scale 2
Feedbk 100%
Dest 3 Scale 3
Dlylhi 325ms
Parameter Settings
BassMpy
.77x 64 meters
Patch Settings
Dest 1 Scale 1
Decay
Lexicon
LoCut
don't care
Delay R
don't care
Offset 1
-
Offset 2
-
Offset 3
-
Size Diffus
77%
Offset 1
88% -