Compaq 230050-001 - StorageWorks NAS B3000 Model N900 Server Rack Installation Instructions page 8

11
Attach the handle to the sides of the NAS B3000.
12
Fully extend the slide rails of the mounting bracket and set the
handles squarely on the rails.
Attach the NAS B3000 to the rails using the screws provided.
13
Remove the handles from the NAS B3000 and slide it into the rack.
Secure the cable management arm server bracket to the device.
14
WARNING: To reduce the risk of personal injury or damage to the
equipment, at least two people are needed to safely load the device
onto the rack.
WARNING: To reduce the risk of injury, remove the hot-plug power
supplies and all the hard drives before loading the device onto the
rack to reduce the weight of the device.
Secure the cable management arm to the cable management arm
server bracket using two screws.
15
Attach the cable management arm screw-retaining plate.
16
Attach the cable management arm to the rear brace of the rack.