Compaq 230050-001 - StorageWorks NAS B3000 Model N900 Server Quick Reference Manual

StorageWorks by Compaq
Quick
Reference
T
hank you for purchasing
your new StorageWorks
NAS B3000 by Compaq.
The NAS B3000 comes with all
device, storage, and software
components needed for immediate
deployment into the workplace. It
is optimized for managing file
services and data storage to a
variety of clients and devices
running different operating
systems. The NAS B3000 is
designed for customers who have
rapidly growing storage needs and
are looking for ways to simplify
administration and improve
performance and reliability in a
multiprotocol file-serving
environment.
© 2002 Compaq Computer Corporation. Compaq,
the Compaq logo, and StorageWorks are trademarks
of Compaq Information Technologies Group, L.P.
All other product names mentioned herein may be
trademarks of their respective companies.
Compaq shall not be liable for technical or editorial
errors or omissions contained herein. The
information in this document is provided "as is"
without warranty of any kind and is subject to
change without notice. The warranties for Compaq
products are set forth in the express limited
warranty statements accompanying such products.
Nothing herein should be construed as constituting
an additional warranty.
Printed in the U.S.A.
STORAGEWORKS NAS B3000 BY COMPAQ QUICK
REFERENCE
First Edition (February 2002)
Part Number 259120-001)
259120- 001
This poster provides the following installation and

configuration information:

Power-down procedure
n
Power-up procedure
n
Drive configuration
n
LED labeling
n
Rear panel connectors and components
n
Ethernet connectors
n
Where to find additional information
n
Power-Down Procedure
TM
Follow the steps below to power down the NAS B3000:
1. Close all programs that are running on the device.
NOTE: When possible, notify file server users in advance that the device will be unavailable, so that users
may have sufficient warning to save their individual files.
2. From the NAS B3000 user interface, select Maintenance, Shutdown.
3. Select Shut Down, OK. The NAS B3000 completes the power-down process
automatically. Several staus messages are displayed during this process.
4. Verify the power button LED is amber.
5. To remove power from the device, disconnect power cords from their power
sources and verify that the power button LED is off.
Power-Up Procedure
To power up the NAS B3000:
1. Verify that all power cords are properly connected.
2. Press the power button and verify that the power button LED is green. The
system
CAUTION: To reduce the risk of system and data corruption:
Use the steps in the "Device Power-Down Procedure" when you power down
n
the device.
Do not press the Power On/Standby switch to power down.
n
Do not disconnect the power cord from the storage enclosure while the device
n
is running.
If a corruption occurs, you must reinitialize the system, reconfigure the device,
n
and recover data from backups.
is fully powered when the Online configuration utility launches.