Configuring A Hard-Disk Drive For Logging - Nokia IP390 - Security Appliance Installation Manual

6. Tighten the retaining screws that holds the hard-disk drive into place.
7. Gently slide the chassis tray assembly back into the appliance until it clicks into place.
The appliance automatically restarts when the chassis tray assembly clicks into place.
8. Tighten the retaining screws that hold the chassis tray assembly.

Configuring a Hard-Disk Drive for Logging

On the flash-based IP390, you can save log files locally by installing and configuring an optional
hard-disk drive. The Nokia Network Voyager Reference Guide and the CLI Reference Guide for
Nokia IPSO contain instructions for configuring a Nokia appliance to store Nokia IPSO log
messages on the disk. This section explains how to configure an optional disk and configure it to
store Check Point log messages on an IP390.
IP390 Security Platform Installation Guide
IP 3
9 0
Chassis tray assembly retaining screws
Installing or Replacing a Hard-Disk Drive
IP390
00535
00538
00525
65