Power Button Is Not Lit; Software Does Not Install - Lexmark 22N0057 - X 5450 Color Inkjet User Manual

Power button is not lit

Check power connection

Software does not install

Check your operating
system
Check your system
requirements
USB cable may not be
connected
Use these steps to install
the printer software
May need to reconnect
power supply
Other software may be
running
1
Disconnect the power cord from the wall outlet, and then from the printer.
2
Plug the cord all the way into the power supply on the printer.
3
Plug the cord into an electrical outlet that other electrical devices have been using.
4
If the light is not on, press
The following operating systems are supported: Windows 98/Me, Windows 2000,
Windows XP, and Mac OS X.
Check that your computer meets the minimum system requirements listed on the box.
1
Check the USB cable for any obvious damage.
2
Firmly plug the square end of the USB cable into the back of the printer.
3
Firmly plug the rectangular end of the USB cable into the USB port of the computer.
The USB port is marked with the
1
Turn off and then restart your computer.
2
Click Cancel on all New Hardware Found screens.
3
Insert the CD, and then follow the instructions on the computer screen to reinstall
the software.
1
Press to turn the printer off.
2
Disconnect the power cord from the wall outlet.
3
Gently remove the power supply from the printer.
4
Reconnect the power supply to the printer.
5
Plug the power cord into the wall outlet.
6
Press to turn the printer on.
1
Close all open software applications.
2
Disable any anti-virus programs.
3
Double-click the My Computer icon.
In Windows XP, click Start to access the My Computer icon.
4
Double-click the CD–ROM drive icon.
5
If necessary, double-click setup.exe.
6
Follow the instructions on the computer screen to install the software.
Troubleshooting
.
USB symbol.
97