Installing Another Language Control Panel; Getting The Printer Ready To Fax - Lexmark 22N0057 - X 5450 Color Inkjet User Manual

Installing another language control panel

These instructions apply only if you received one or more additional language control panels with the printer.
1
Lift and remove the control panel (if one is installed).
2
Choose the correct control panel for your language.
3
Align the clips on the control panel with the holes on the printer, and then press down.

Getting the printer ready to fax

CAUTION—SHOCK HAZARD: Do not use the fax feature during a lightning storm. Do not set up this product
or make any electrical or cabling connections, such as the power supply cord or telephone, during a lightning
storm.
Choosing a fax connection
You can connect the printer with equipment such as a telephone, an answering machine, or a computer modem. If
problems occur, see "Setup troubleshooting" on page 96.
Note: The printer is an analog device that works best when directly connected to the wall jack. Other devices (such
as a telephone or answering machine) can be successfully attached to pass through the printer, as described in the
setup steps. If you want a digital connection such as ISDN, DSL, or ADSL, a third-party device (such as a DSL filter) is
required.
You do not need to attach the printer to a computer, but you do need to connect it to a telephone line to send and
receive faxes.
You can connect the printer to other equipment. See the following table to determine the best way to set up the
printer.
Equipment
•
The printer
•
A telephone cord
Benefits
Send and receive faxes without using a
computer.
Setting up the printer
See this section
"Connecting directly to a telephone
wall jack" on page 16
12