Table of Contents
Advertisement
960L
Figure 6: Standard Algorithm Edit Screen
Method B:
1. Press the EDIT button on the LARC2
when the desired delay program is loaded
to access the Delay Voices Edit screen.
2. Use the numeric keypad or arrow keys on
the LARC2 to select the desired delay
voice. Parameters for the selected delay
voice will automatically be assigned to the
faders.
3. Press the FINE ADJ button on the LARC2.
The button will light to indicate that fine
adjust is enabled, and the faders will
automatically center.
4. Use the appropriate fader to fine adjust
the setting of the desired parameter.
5. When finished, press the FINE ADJ button
on the LARC2 again. The light on the
button will disappear to indicate that fine
adjust has been disabled, and the faders
will automatically return to their set
positions.
STANDARD ALGORITHM EDIT
SCREEN
While the Delay Voices Edit screen contains
parameters associated with delay voices, the
Standard Algorithm Edit screen shown in
Figure 6 (above) contains all other parameters
associated with the currently running delay
algorithm.
Delays & Additional 96kHz Reverbs Package
To toggle between the Standard Algorithm
Edit and Delay Voices Edit screens, use one
of the following methods:
Method A:
1. When the 960L is in Algorithm Edit Mode,
press the EDIT button on the LARC2 to
toggle between the Standard Algorithm
Edit and Delay Voices Edit screens.
Method B:
1. Press the ALG! soft button to access the
Parameter Selection Menu shown in
Figure 7 (below).
2. Select the desired option – Standard
Parameters accesses the Standard Algorithm
Edit screen shown in Figure 6 (above), and
Delay Voices accesses the Delay Voices Edit
screen shown in Figure 5 (page 12).
Figure 7: Parameter Selection Menu
13
Advertisement
Table of Contents
