Lexicon 960L - ADDENDUM Owner's Manual Addendum page 12

Delays & Additional 96kHz Reverbs Package
Figure 5: Delay Voices Edit Screen
Delay Voices Edit Screen
(continued from page 11)
To edit a delay voice parameter:
1. Press the EDIT button on the LARC2
when the desired delay program is loaded
to access the Delay Voices Edit screen.
2. Use the numeric keypad or arrow keys on
the LARC2 to select the desired delay
voice. Parameters for the selected delay
voice will automatically be assigned to the
faders.
3. Use the appropriate fader to adjust the
desired parameter.
Delay Voice Panning
To use the joystick to position a delay voice:
1. Press the EDIT button on the LARC2
when the desired delay program is loaded
to access the Delay Voices Edit screen.
2. Use the numeric keypad or arrow keys on
the LARC2 to select the desired delay
voice. The panner for that delay voice will
automatically be assigned to the joystick
on the LARC2.
3. Press the JOYSTICK button on the LARC2
to lock the joystick.
12
4. Move the joystick to position the selected
delay voice.
Fine Adjusting Parameter Settings
To make fine adjustments to delay voice
parameter settings, use one of the following
methods:
Method A:
1. Press the EDIT button on the LARC2
when the desired delay program is loaded
to access the Delay Voices Edit screen.
2. Use the numeric keypad or arrow keys on
the LARC2 to select the desired delay
voice. Parameters for the selected delay
voice will automatically be assigned to the
faders.
3. Touch the appropriate fader to select the
desired parameter.
4. Use the + (increase) and – (decrease)
buttons on the LARC2 to fine adjust the
setting of the selected parameter.
Note:
Method A cannot be used to fine adjust
the FbkMST or LvlMST parameter
settings.
Lexicon