Lexicon 960L - ADDENDUM Owner's Manual Addendum page 6

Delays & Additional 96kHz Reverbs Package
Figure 4: License Key Entry Screen
Enabling Instructions
5. Use the up and down arrow keys on the
LARC2 to select the Delays & Additional
96kHz Reverbs Package. Then, press the
ENTER button on the LARC2 to access the
License Key Entry screen shown in Figure 4
(above).
6. Use the numeric keypad on the LARC2 to
enter the 12-digit license key that came
with the Delays & Additional 96kHz
Reverbs Package. If an incorrect digit is
entered, press the – button on the LARC2
to move the cursor back to the appropriate
square. Then, enter the correct digit.
7. When all 12 digits have been entered, use
the down arrow key on the LARC2 to select
the @@@@ button located at the bottom
of the text editor. Then, press the ENTER
button on the LARC2 to enable the Delays
& Additional 96kHz Reverbs Package.
The following message will display if a
valid license key has been entered: "Delays
& Additional 96kHz Reverbs has been
Successfully Enabled! When all license keys
have been entered, please power cycle the
960L." If this occurs, press the OK soft
button that appears at the bottom of the
LARC2 display. Then, proceed to step 8.
6
(continued from page 5)
An "Invalid package key" message will
display in the top-left corner of the LARC2
diplay if an invalid license key has been
entered. If this occurs, begin again with
step 1 (page 5). If the problem persists,
contact Lexicon Customer Service at 781-
280-0300.
8. If desired, enter additional license keys at
this time. Refer to the documentation
enclosed with the license key for specific
enabling instructions. If no additional
license keys need to be entered, proceed
to step 9.
9. When all license keys have been entered,
use the front panel standby button to
power cycle the 960L.
10. When the 960L powers on, follow steps 1
to 4 (page 5) to confirm that the Delays &
Additional 96kHz Reverbs Package has
been enabled. If a No appears in the
Enabled field for the Delays & Additional
96kHz Reverbs Package, begin again with
step 1 (page 5). If the problem persists,
contact Lexicon Customer Service at 781-
280-0300.
Lexicon