Lexicon 12T User Manual page 65

Routing MMIO audio to and from
the PC-90 is done in the Reverb
tab of LexPanel.exe. To route
audio:
1. Boot LexPanel.exe by double-
clicking on the Lexicon Studio icon
at the bottom right corner of your
task bar.
2. Click the Reverb tab to view all
MMIO routing and control options
for the PC-90.
3. Using the To and From pulldown menus for each PC-90 machine, route your audio
according to which MMIO channels and interface outputs you would like to use. The picture
below shows a typical setup for Machine 1, mixing the reverb and MMIO dry audio all through
the analog outputs.
For more information on how to route MMIO audio to and from your PC-90, refer to Chapter 4:
MMIO.
57