Lexicon 12T User Manual page 128

------------------------------------------------------------------------------------------------------------------------------------------------
12T_Analog_In L -->
12T_Analog_In R -->
12T_SPDIF_In L -->
12T_SPDIF_In R -->
------------------------------------------------------------------------------------------------------------------------------------------------
The source (send from your console) is routed directly to the inputs of the PC90 engines and the
outputs can be routed (analog or digitally) to the returns of the mixer. There is no latency.
You are not restricted to the routing shown in this example. It is possible to use any input as a
Source and any output as a Destination.
Notes:
The example above requires the audio clock be set to SPDIF12T. If only analog sources are
being used this is not necessary.
Machine 1
Machine 2
B-7
--> 12T_Analog_Out L
--> 12T_Analog_Out R
--> 12T_SPDIF_Out L
--> 12T_SPDIF_Out R