Lexicon 12T User Manual page 60

2. Activate an effects processor by clicking on its Power button.
3. Verify that the effect output is routed to the desired source, in the bus pop-up in the lower
right corner. The default setting for this is Master.
Pull down the pop-up menu in the processor's upper right corner and select PC-90 Machine 1 or
PC-90 Machine 2.
Selecting a PC-90 machine in this pulldown will activate a PC-90 Rack Xpander within VST.
1. Select other effect programs by clicking on the left or right Program buttons. These controls
will allow you to cycle through all of the factory presets for the current algorithm. (You may want
to set up a cycle and have the audio channel play back while you are making settings in order
to hear the effect of your selected effect programs.)
2. Use the Send Level knob in the EQ window to control the amount of effect for the audio
channel.
52