Lexicon 12T User Manual page 63

1. Click on the PARA button, to activate a display of three parameters. The parameter currently
selected for editing is displayed with a border.
2. If the parameter you want to edit is not visible in the display, click on the left or right part of the
P a g e button to go to another parameter page. To return to Parameter mode, click on the
PARA button again.
3. Set a value for the selected parameter with the Value knob. To make small adjustments, click
on the knob, hold down the mouse button and move the pointer away from the knob before
turning it. The further away from the knob the pointer is, the finer the value adjustments.
4. Use the INC and DEC buttons for super-fine manipulation of the active parameter.
55