Table of Contents
Advertisement
316870/A
4
When the charger is connected to the sensor, check the
charger lamps.
• After a few seconds, the lamp on the charger will change
from yellow to orange/red. This means that fast charging
is in progress.
• When the battery in the sensor has reached 90% capacity
the lamp will change from orange/red to green with
short yellow flashes. This means that top charging is in
progress.
• When the battery is fully charged, the lamp turns green.
Trickle charging is now active. You can safely allow
trickle charging for long periods of time.
Indicators
The Simrad PI MaxiCharger is only equipped with a single
indicator lamp, this lamp will however change colour to show the
status of the charging process.
• Yellow: The charger is connected to 230 Vac, it has not been
connected to the sensor, and it is ready for use.
• Orange/Red: The charger is connected to a sensor, and fast
charging is in progress.
• Green with short yellow flashes: Top charging is in progress.
• Green: Trickle charging is in progress.
Charging and maintenance
29
Advertisement
Table of Contents
Need help?
Do you have a question about the PI DEPTH - MANUAL 2 and is the answer not in the manual?
Questions and answers