Table of Contents
Advertisement
DRAWING FILE
305265/A
This chapter contains relevant drawings related to the electrical
and physical installation of the 38-9 Single beam transducer.
Note
The mechanical drawings are for information and guidance only.
They are not in scale. All dimensions are in mm unless otherwise
is noted.
Observe the maximum torque (31 Nm) when the transducer is
bolted into the mounting ring!
The original installation drawings are available on PDF and
AutoCad format. Visit
In addition to the drawings available in this chapter, an additional
drawing is provided on the web site. This is drawing 599–203664
describing an optional steel tank for the transducer.
Drawings
Single frequency, single beam, low power transducer connection
on page 36
Outline dimensions on page 37
Mounting arrangement on page 38
Mounting ring on page 40
Blister assembly on page 42
Blister design on page 44
www.simrad.com
to download.
Drawing file
35
Advertisement
Table of Contents
