Introduction - Simrad 38-9 - INSTALLATION REV A Installation Manual

INTRODUCTION

305265/A
The purpose of this manual is the provide the basic information
required to install the 38-9 Single beam transducer.
Note that although drawings are provided to explain the
installation principles, the installation shipyard must provide the
final drawings required to fit each individual vessel. Also, when
applicable, the installation shipyard must have the drawings and
installation approved by the proper authorities.
Transducer order number: KSV-203635.
A cable gland kit for steel hull is included with the delivery.
Other cable glands must be ordered separately.
Transducer installation
The next chapter in this manual provides general guidelines
for transducer installation. The drawings specific for the 38-9
transducer are located in the Drawing file.
Technical specifications
Refer to the 38-9 Product specification.
Additional parts
The following items can be supplied by Simrad to facilitate
installation:
• Mounting ring: Order number 499–203336
• Transducer cable (for extension): Order number 642–016604
Introduction
5