Placing Originals; Original Orientation - Ricoh Aficio MP 1600SPF Copy Reference Manual

Placing Originals

Placing Originals
This section describes the procedure for placing originals on the exposure glass
and in the ADF or ARDF.
1
Take care to place originals after any correction fluid and ink has completely
dried. Not taking this precaution could cause marks on the exposure glass that
will be copied onto paper.
Reference
p.7 "Originals"

Original Orientation

You can set the original orientation in the following ways.
Originals
Note
❒ Originals should be aligned to the rear left corner when placing them on the
exposure glass. However, some copy functions may produce different results
depending on the orientation of the originals. For details, see the explanations
of each function.
Reference
p.47 "Duplex (Type 2 only)"
p.50 "One-Sided Combine"
p.53 "Two-Sided Combine (Type 2 only)"
p.56 "Series Copies"
12
ADF or Exposure
ARDF glass
set23EE
set11EE