Settings Required To Use Scan To Folder Function - Ricoh Aficio MP 1600 General Settings Manual

Settings Required to Use Scan to Folder Function

This section lists the settings required for sending file.
Ethernet
This section lists the settings required for sending file with Ethernet cable.
For details about how to specify the settings, see "Interface Setting" and "File
Transfer".
Menu
Interface Settings/Network Machine IPv4 Address
Interface Settings/Network IPv4 Gateway Address
Interface Settings/Network DNS Configuration
Interface Settings/Network DDNS Configuration
Interface Settings/Network Domain Name
Interface Settings/Network WINS Configuration
Interface Settings/Network Effective Protocol
Interface Settings/Network LAN Type
Interface Settings/Network Permit SNMPv3 Communictn.
Interface Settings/Network Permit SSL/TLS Comm.
Interface Settings/Network Host Name
File Transfer
Note
❒ In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒ [LAN Type] is displayed when the wireless LAN interface board is installed. If
both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
Reference
p.47 "Interface Settings"
p.53 "File Transfer"
User Tool
Default User Name/PW(Send)
Network Settings
Setting Requirements
Necessary
Necessary
As required
As required
As required
As required
Necessary
Necessary
As required
As required
As required
As required
1
23