Q
Press the {OK} key.
R
Press the {User Tools/Counter} key.
Note
❒ To register the name, see Registering Names".
❒ You can enter up to 191 characters for the user name.
❒ When using POP before SMTP Authentication, you can enter up to 63 al-
phanumeric characters.
❒ You can enter up to 64 characters for the password.
❒ To change the SMTP Authentication settings, repeat step
Reference
p.140 "Registering Names"
p.15 "Network Settings"
"Entering Text", About This Machine
LDAP authentication
For each user registered in the Address Book, you can register a login user name
and login password to be used when accessing an LDAP server.
To use an LDAP server, you need to program it beforehand.
Important
❒ When [Do not Specify] is selected for LDAP Authentication, the User Name
and Password that you have specified in Program/Change LDAP Server of
Administrator Tools settings applies. For details about LDAP authentication,
consult your administrator.
A
Select [System Settings] using {U} or {T}, and then press the {OK} key.
Registering SMTP and LDAP Authentication
B
to
P
.
7
253