Ricoh Aficio MP 1600 General Settings Manual page 215

T
If you want to change the port number, enter the new port number, and
then press the {OK}key. Otherwise, just press the {OK} key.
U
If you want to change the path, enter the new path, and then press the
{OK}key. Otherwise, just press the {OK} key.
V
Press [Com.Test] to check the path is set correctly.
W
Press [Exit].
X
Press the {Escape} key twice.
Y
Press [End], and then press the {OK} key.
Registering Folders
207
7