Ricoh 3200SF - Multifunctional SP Network-Ready User Manual page 102

N
: If you want to set a specific IP address on a specific
OTE
network printer, click the Set IP Address button. The Set IP
Address window appears. Do as follows:
a. Select a printer to be set with a specific IP address from the
list.
b. Configure an IP address, subnet mask, and gateway for the
printer manually and click Configure to set the specific IP
address for the network printer.
c. Click Next.
6
Select the components to be installed. After selecting the
components, the following window appears. You can also
change the printer name, set the printer to be shared on
the network, set the printer as the default printer, and
change the port name of each printer. Click Next.
To install this software on a server, select the Setting up
this printer on a server checkbox.
9
Installing Printer Software in Windows
7
After the installation is finished, a window appears asking
you to print a test page. If you so desire, select the
checkbox and click Finish.
Otherwise, just click Finish.
N : After setup is complete, if your printer driver doesn't
OTE
work properly, reinstall the printer driver. See "Reinstalling
Printer Software" on page 10.