Kuryakyn 9438 Installation Instructions

ALLEY CAT AIR CLEANER, GLOSS BLACK
Thank You For Choosing Küryakyn!
Protect yourself and others from potential injury and property damage or loss. Pay close attention to all instructions, warnings, cautions, and notices
regarding the installation, use, and care of this product.
THIS PRODUCT IS NOT LEGAL FOR SALE OR USE ON POLLUTION CONTROLLED VEHICLES.
ENSURE THAT THE FOLLOWING PARTS HAVE BEEN INCLUDED IN THE KIT:
1 Alley Cat Air Cleaner Cover
1 Stay Ring—Black Plastic
1 Hardware Kit Containing:
1
1
1
3
1 Installation Instructions
YOU WILL ALSO NEED:
Set of Hex Wrenches, Set of Combination Wrenches, Torque Wrench (IN LBS), Socket Set, Blue Thread Locker
STEP 1 Read and understand all steps in the instructions before starting the installation. Park the motorcycle on a hard, level surface and turn
IGN OFF. Allow the engine and exhaust system to cool. Remove the main fuse.
STEP 2 Remove the existing air cleaner cover. Set aside, it will not be reused.
NOTE:
9438-12HD-0715
THIS INDICATION ALERTS YOU TO THE FACT THAT IGNORING THE CONTENTS DESCRIBED HEREIN CAN
RESULT IN POTENTIAL DEATH OR SERIOUS INJURY.
This indication alerts you to the fact that ignoring the contents described herein may negatively affect product per-
formance and functionality or damage the product itself or the product to which it is being attached.
Double Ended Stud
Nylon Ratchet Washer
Tri-Bar Fastener
Adhesive Backed Foam Blocks
These installation instructions contain important information. Ensure that the end user receives this copy and is
aware of its importance for future use.
If you have a Küryakyn Street Sleeper II air cleaner kit installed (P/N 9530 or P/N 9537) you will also need to
remove the existing X Vibration Dampener Assembly and the Composure Strap. These will not be reused
with the Alley Cat cover.
THE END USER'S SAFETY DEPENDS UPON PROPER INSTALLATION OF THIS PRODUCT. IF A STEP IN
THESE INSTRUCTIONS IS NOT WITHIN YOUR CAPABILITIES OR YOU DO NOT HAVE THE CORRECT
TOOLS, HAVE YOUR DEALER PERFORM THE PROCEDURE. IMPROPER INSTALLATION OF THIS
PRODUCT COULD RESULT IN DEATH OR SERIOUS INJURY.
ACCIDENTAL VEHICLE START-UP COULD CAUSE DEATH OR SERIOUS INJURY, REMOVE THE MAIN
FUSE BEFORE PROCEEDING.
Avoid damage to the motorcycle. Protect painted surfaces with a soft cloth or blanket.
9438
Page 1