Advertisement
LIGHTED CURVED VERTICAL SIDE MOUNT PLATE
PARTS INCLUDED
1
Lighted Curved Vertical Side Mount License Plate Holder with Brake Light
1
Hardware Kit, Including,
4
4" Black Nylon Cable Ties
1
Dielectric Grease Pack
4
Female T-Tap Scotch Lock Connectors
4
Male Connectors
1
1" X 3" Foam Adhesive Tape
1
Installation Instructions
Please read and understand entire instructions before starting installation.
THANK YOU FOR CHOOSING K
IN ORDER TO PROTECT YOU AND OTHERS FROM POSSIBLE INJURY AND/OR
PROPERTY DAMAGE OR LOSS, PLEASE PAY CLOSE ATTENTION TO ALL
INSTRUCTIONS, WARNINGS, CAUTIONS AND ATTENTION NOTES REGARDING
THE USE AND CARE OF THIS PRODUCT.
WARNING!
THIS INDICATION ALERTS YOU TO THE FACT THAT IGNORING
THE CONTENTS DESCRIBED HEREIN CAN RESULT IN
POTENTIAL DEATH OR SERIOUS INJURY
ATTENTION!
This indication alerts you to the fact that ignoring the contents
described herein may negatively affect product performance and
functionality.
CAUTION!
This indication alerts you to the fact that ignoring the contents
described herein can result in potential injury or material
damage.
TOOLS SUGGESTED
Torque wrench (ft/lbs), Set of Sockets, Set of Combination Wrenches, Set of Hex
Wrenches, Tin Snips, Test Light, Wire Crimper
STRICTLY OBSERVE THE FOLLOWING GUIDELINES IN ORDER TO USE THE
PRODUCT PROPERLY AND AVOID POTENTIALLY DANGEROUS ACCIDENTS.
NOTE:
The lighted side mount license plate holder is compatible with any model
but you must order the correct splined mount to meet your specific needs (sold
separately).
NOTE:
The following installation instructions assume that you have already installed
the appropriate splined adapter for your specific application.
9252-31HD-0611
-cont.-
with BRAKE LIGHT
ϋ
RYAKYN!
9252
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Kuryakyn 9252
Summary of Contents for Kuryakyn 9252
- Page 1 LIGHTED CURVED VERTICAL SIDE MOUNT PLATE 9252 with BRAKE LIGHT PARTS INCLUDED Lighted Curved Vertical Side Mount License Plate Holder with Brake Light Hardware Kit, Including, 4” Black Nylon Cable Ties Dielectric Grease Pack Female T-Tap Scotch Lock Connectors Male Connectors 1”...
- Page 2 ATTENTION! Your local ordinances may have specific requirements on the approved angle of the plate mount. Be sure the license plate is at the approved angle and meets all local ordinances. ATTENTION! The brake light on the license plate holder is not intended to function as the main brake light, it is meant only to be an accent accessory.
Need help?
Do you have a question about the 9252 and is the answer not in the manual?
Questions and answers