Using the control panel buttons
Press To
1
Turn the printer on and off.
2
Apply red-eye reduction to the photo on the display when it is printed. An icon appears on the bottom
of the display to indicate that red-eye reduction will be performed. Press
correction.
Start a color print job using the current settings.
3
4
•
Navigate through menu selections of the main menu.
•
Navigate through selections of a submenu.
•
When viewing photos, navigate from one photo to another.
5
•
In a menu, enter submenus and perform actions.
•
Select a photo being viewed on the display. Press
•
Eject paper. (Press
6
•
Navigate through submenus of a menu.
•
When previewing a photo, decrease the number of copies to be printed.
7
•
Navigate through menu selections of the main menu.
•
Navigate through selections of a submenu.
•
When viewing photos, navigate from one photo to another.
8
•
In a submenu, save the current selection, and return to the previous display.
•
When viewing a photo slideshow, pause or stop the slideshow.
•
When printing a photo or an alignment page, stop and cancel the job, and eject the paper.
9
•
In the photo selection screen, bring up the Photo Edit Mode menu.
•
In the Print Preview screen, bring up the Print Settings menu.
10
•
Navigate through submenus of a menu.
•
When previewing a photo, increase the number of copies to be printed.
for three seconds.)
Understanding the printer
28
again to cancel the
again to deselect the photo.