Printing Photos From A Digital Camera Using Dpof - Lexmark 22W0000 - P 350 Color Inkjet Printer User Manual

7
Press to continue.
8
Press or to navigate to the first photo in the range to be printed.
9
Press .
10
Press or to navigate to the last photo in the range to be printed.
11
Press .
12
Press or to select a photo size and paper size, and the number of copies to print per photo.
13
Press .
14
If you want to adjust the print settings:
a
Press .
b
Make your selections.
c
Press to save your selections, and then go back to the Print Preview screen.
15
Press to print.
Note: To prevent smudging or scratching, avoid touching the printed surface with your fingers or sharp objects.
For best results, remove each printed sheet individually from the paper exit tray, and allow the prints to dry at
least 24 hours before stacking, displaying, or storing.
Related topics:
•
"Printing photos" on page 0

Printing photos from a digital camera using DPOF

Digital Print Order Format (DPOF) is a feature available on some digital cameras. If your camera supports DPOF, you
can specify which photos to print, and how many of each, while the memory card is still in the camera. The printer
recognizes these settings when you insert the memory card into the printer.
Note: If you specified a photo size while the memory card is still in the camera, make sure the size of the paper loaded
in the printer is not smaller than the size you specified in the DPOF selection.
1
Load photo paper, with the glossy or printable side facing you. (If you are not sure which side is the printable side,
see the instructions that came with the paper.) For more information, see "Loading paper" on page 5.
2
Insert a memory card. For more information, see "Inserting a memory card" on page 7.
3
Press or repeatedly until Print Photos appears on the display.
4
Press .
5
Press or repeatedly until Print Camera Selections is selected. This option appears only when there
is a valid DPOF file on your memory card.
6
Press .
7
Press to print.
Note: To prevent smudging or scratching, avoid touching the printed surface with your fingers or sharp objects.
For best results, remove each printed sheet individually from the paper exit tray, and allow the prints to dry at
least 24 hours before stacking, displaying, or storing.
Using the printer
18