3
Press
.
4
Press
to continue.
Each photo is displayed for a few seconds.
5
If you want to move to the previous or next photo manually, press
6
Use any of the following buttons:
•
Press
to select a photo or photos to print after the slideshow.
•
Press
to pause the slideshow. Press
•
Press
to rotate the photo on the display.
When the slideshow is stopped, the photo or photos you selected for printing during the slideshow are displayed
by pressing
.
Related topics:
•
"Viewing photos" on page 0
Using the Tools menu
1
Press
or
repeatedly until Tools appears on the display.
2
Press
.
From here
You can
Device Defaults Select:
•
Language to change the language setting.
•
Country to set the default blank paper size and date format being used in your location.
•
Power Save to set the length of time before the printer, if left unused, enters a low power
state. During Power Save, the display and backlight will be turned off. Press any button to
restore power to the printer.
Print Settings
Select a paper size, photo size, layout, print quality, and paper type.
Maintenance
Select:
•
View Ink Level to view a graphic representing the ink level in the print cartridge. For more
information, see "Viewing the ink level" on page 50.
•
Clean Cartridge to clean the print cartridge nozzles. For more information, see "Cleaning the
print cartridge nozzles" on page 43.
•
Align Cartridge to align the cartridge. For more information, see "Aligning the print cartridge"
on page 42.
•
Print Test Page to print a test page. For more information, see "Printing a test page" on
page 49.
•
Reset Defaults to reset default settings to factory settings.
again to stop the slideshow.
Understanding the printer
31
or
.