Related Manuals for Black Horse Off Road 17FP32MA
Summary of Contents for Black Horse Off Road 17FP32MA
- Page 1 BLACK MODULAR GRILL GUARD FOR FORD F150 15-17 INSTALLATION INSTRUCTIONS BLACK MODULAR GRILL GUARD FOR FORD F150 15-20 PART # 17FP32MA 1 / 12...
-
Page 2: Before Installation
BLACK MODULAR GRILL GUARD FOR FORD F150 15-17 Before Installation ⚫ Please read the instruction completely for easy installation, which will also help you to avoid scratches or other potential damages to your appealing car. ⚫ The information shown here is for reference only and may differ from the product that you receive, however the goods are fitted in the same way. - Page 3 BLACK MODULAR GRILL GUARD FOR FORD F150 15-17 ○ ○ Allen Wrench S=5 Driver/left Top Bracket ○ ○ Hex Nylon Lock Nut M8 Split lock washer D12 ○ ○ Flat Washer D12 Large Washer D8 ○ ○ hex bolt M8_30 Socket head cap screw M8_25 ○...
-
Page 4: Installation Step
BLACK MODULAR GRILL GUARD FOR FORD F150 15-17 Installation Step Install left and right brush guard on the front guard as figure 1. 4 / 12... - Page 5 BLACK MODULAR GRILL GUARD FOR FORD F150 15-17 PARTS LIST: Grille Guard 12mm Lock Washer Driver/left Frame Bracket 10-1.5mm x 30mm Hex Bolt Passenger/right Frame Bracket 10mm x 24mm OD x 2.2mm Flat Washer Driver/left Top Bracket (2015-17) 10-1.5mm Nylon Locknut Passenger/right Top Bracket (2015-17) 8-1.25mm x 40mm Hex Bolt Driver/left Top Bracket (2018)
- Page 6 BLACK MODULAR GRILL GUARD FOR FORD F150 15-17 b. Select the driver side Frame Mounting Bracket, (Figure 8). Insert the Bracket between the tow hook and the frame. c. Reattach the tow hook over the Bracket with the factory bolts. Leave hardware loose. If Bracket installation interferes with tow hook, remove tow hook and attach the Bracket to the bottom of the frame and Nut Plate with the included (2) 12mm x 35mm Hex Bolts, (2) 12mm Lock Washers and (2) 12mm Flat Washers, (Figure 8)
- Page 7 BLACK MODULAR GRILL GUARD FOR FORD F150 15-17 e. Temporarily reinstall bumper. Hold splash guard up against bottom of brackets and in line with mounting points on bottom of bumper. Mark location of brackets onto splash guard. f. Cut out slots to clear brackets. Cut as little as possible to clear brackets, (Figure 15). g.
- Page 8 BLACK MODULAR GRILL GUARD FOR FORD F150 15-17 Driver Side Installation Pictured 8mm x 40mm Hex Bolt 8mm Lock Washer Front 8mm Flat Washer From behind bumper, release clips attaching rubber cover to back of bumper above bumper brackets to access the bumper bolts (Fig 7). Insert the Top Bracket (Fig 9 &...
- Page 9 BLACK MODULAR GRILL GUARD FOR FORD F150 15-17 Driver Side Installation Pictured (2) 12mm x 35mm Hex Bolts (2) 12mm Lock Washers (2) 12mm Flat Washers Front (Fig 8) Attach Frame Bracket to Nut Plate. (Fig 9) 2015-17 models: Driver side without tow hook Front (Fig 10) 2015-17 models: Release clips attaching bumper pad to steel bumper...
- Page 10 BLACK MODULAR GRILL GUARD FOR FORD F150 15-17 Driver Side Installation Pictured (Fig 12) 12mm Double Nut Plate 12mm x 35mm Hex Bolt 12mm Lock Washer 12mm Flat Washer Front Front (Fig 13) Insert Nut Plate into open end of frame- applies to models without tow hooks only Do not cut through front or back edge of splash guard...
- Page 11 BLACK MODULAR GRILL GUARD FOR FORD F150 15-17 Driver Side Installation Pictured 8mm x 40mm Hex Bolt 8mm Lock Washer 8mm Flat Washer Front (Fig 18) 2018 models: Remove bumper assembly (Fig 19) 2018 models: Driver/left Top Support Bracket Front 8mm x 40mm Hex Bolt 8mm Lock Washer 8mm Flat Washer...
- Page 12 BLACK MODULAR GRILL GUARD FOR FORD F150 15-17 Driver Side Installation Pictured Front 8mm x 30mm Hex Bolt (2) 8mm Flat Washers 8mm Nylon Lock Nut (Fig 23) 2018 models: Top Support Bracket and Frame Bracket installed Front (2) 10mm x 30mm Hex Bolts (4) 10mm Flat Washers (2) 10mm Nylon Lock Nuts (Fig 24) 2015-17 models: Complete installation...
Need help?
Do you have a question about the 17FP32MA and is the answer not in the manual?
Questions and answers