Advertisement
Quick Links
INSTALLATION INSTRUCTIONS
WARNING: DO NOT EXCEED PRODUCT RATING OR TOW VEHICLE LAMP LOAD RATING, WHICHEVER IS LOWER
APPLICATIONS
Make
Model
Hyundai
Santa Fe
CUSTOM WIRING
CONNECTOR
WIRING LOCATION GUIDE
SUVS, MINI & FULL-SIZED VANS ( S )
Representative vehicle shown below
S5 - Behind driver side rear bumper
S5
NOTICE
All steps must be followed to ensure the wiring connector will
function properly. Once installed, test for proper function by
using a test light or connecting a properly wired trailer.
TOOLS NEEDED
None
WARNING
The battery connection must be fuse-protected, 10-amp max.
Exceeding the product rating can cause loss of warranty,
overheating and potential fire. Do not exceed product rating
or tow vehicle lamp load rating, whichever is lower.
Signal Circuits - 3.0 amps per side
Tail / Running Circuits - 6.0 amps total
Check vehicle owner's manual or contact
the vehicle manufacturer for more information.
PAGE 1 • 56346-INS-RA
Advertisement
Related Manuals for curt 56346
Summary of Contents for curt 56346
- Page 1 Signal Circuits - 3.0 amps per side Tail / Running Circuits - 6.0 amps total Check vehicle owner's manual or contact the vehicle manufacturer for more information. PAGE 1 • 56346-INS-RA...
- Page 2 4-flat dust cover to help prevent corrosion. of the trunk. When not in use, roll up and store in a convenient, out of the way location inside the trunk. Secure any loose wires with the provided cable ties. 56346-INS-RA • PAGE 2...
Need help?
Do you have a question about the 56346 and is the answer not in the manual?
Questions and answers