PROAIM CA270 Assembly Manual

Snaprig dual cold shoe bracket for rode wireless go

Download this manual

SnapRig Dual Cold Shoe Bracket for Rode

Wireless GO

(CA270)

A s s e m b l y M a n u a l

What's In The Box

Please inspect the contents of your shipped package to ensure you have received everything that is listed

below.

Two-in-One Cold Shoe Mount

Bracket (Part-1)

2 x Audio Cable (Part-2)

No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright

statutes or in writing by the Publisher.

Need help?

Do you have a question about the CA270 and is the answer not in the manual?

Page 1 SnapRig Dual Cold Shoe Bracket for Rode Wireless GO (CA270) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
Page 2 Safety Hints Make sure to properly push fit the lead to ensure a proper connection. Knob should be tightened properly to ensure a safe connection Specifications COLD SHOE BRACKET - Construction : High-grade CNC Aluminum - Connectors: 2 x 3.5 mm Audio Input 1 x 3.5 mm Audio Output - Mount Type: Cold Shoe type, 2 x Ports for Mounting Clips of Rode Wireless GO &...
Page 3 Two-in-One Cold Shoe Mount Bracket Setup 1. Two-in-One Cold Shoe mount bracket made for Rode Wireless GO and Saramonic Blink 500 microphone systems to connect two audio sources simultaneously. 2. Slide the cold shoe mount onto the camera cage handle (Not Included).as shown in the image.
Page 4 YOUR PROAIM SNAPRIG DUAL COLD SHOE BRACKET FOR RODE WIRELESS GO ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts.