Buyers 5231112 Installation Instructions

5231112 Flexible Step
Fig. 1
Tools needed for assembly
• Drill
• 1/16" Drill Bit
• 1/2" Open-end Wrench
• 1/2" Socket and Wrench
• 9/16" Open-end Wrench
• 9/16" Socket
• Marking Device (to transfer holes)
Assembly Instruction
Wear proper safety equipment such as safety goggles and
gloves when installing product on vehicle.
1. Assemble step as shown in fig #2. Assembly is the
same if mounted on right, left, or rear of the vehicle.
2. Insure all fasteners are properly tightened.
3. Locate position of step on vehicle and mark hole
locations. Drill and mount step using the 3/8-16
hardware supplied. Once again ensure the hardware
is properly tightened.
Installation Instructions
Contents
• (2) Rubber Straps
• Mounting Bracket
• (4) Plates
• (4) Pacers
• Step
• (8) 1/2" Lock Washers
• (8) 1/2" Nuts
• (2) 1/2" x 3½" Bolts
• Wire
• Spring
Fig. 2
Hardware
• 5/16-18" x 1/2" Cap Screw
• 5/16-18" Nylock Nut
• 5/16" Washer
• 3/8-16" x 1" Screw
• 3/8" Flat Washer
• 3/18-16" Nylock Nut
Warranty
Buyers Products Co. warrants all truck/trailer hardware manufac-
tured or distributed by it, to be free from defects in material and
workmanship for a period of one year from date of shipment. Parts
must be properly installed and used under normal conditions.
Any product which has been altered, including modification, mis-
use, accident or lack of maintenance will not be considered under
warranty. Normal wear is excluded. The sole responsibility of Buyers
Products Co. under this warranty is limited to repairing or replacing any
part or parts which are returned, prepaid, and are found to be defective
by Buyers Products Co. Authorization from Buyers Products Co. must
be obtained before returning any part. No charges for transportation
or labor performed on Buyers' products will be allowed under this
warranty.
www.buyersproducts.com
Phone (440) 974-8888
Fax 800-841-8003
3012037 Rev. C