Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for VEVOR XN240A
Summary of Contents for VEVOR XN240A
- Page 1 SLUSH MACHINE USER MANUAL...
- Page 2 Parameter settings In standby mode, press and hold the setting button for 5 seconds to enter the user parameter setting state. The 2-digit digital tube on the left displays the parameter code, and the 3-digit digital tube on the right displays the parameter value. At this time, press the setting key to switch parameters. Press the lamp key (plus) or the adjustment key (minus) to change the parameter value.
- Page 3 Double cylinder snow melter temperature settings Snow melting settings 2.The left 2-digit digital tube displays 1.In standby mode, press the parameter code, and the right 3- and hold the setting button digit digital tube shows the current set for 5 seconds to enter the temperature.
- Page 4 Three-cylinder snow melter temperature settings Snow melting settings 2.The left 2-digit digital tube displays the parameter code, and the right 3- digit digital tube shows the current set 1.In standby mode, press temperature. At this time, press the and hold the setting button setup key to switch the left parameter for 5 seconds to enter the code to S1/S2/S3.Press the lamp key...
- Page 5 Note: 1.When the raw material is a sugar-containing non-alcoholic drink, set the slush temperature to -3℃ to -1.5℃. 2.When the raw material is an alcoholic drink, set the slush temperature to -9℃ to -5℃. The temperature for smoothies varies based on the alcohol content, so please set the slush temperature in the cylinder accordingly.
- Page 6 Phenomenon One side is forming while the other side is not slushing 1.When one side of the material cylinder is frozen, refrigeration must be stopped for more than 10 minutes. It's essential to ensure that the raw material's sugar content is ≥13%. If needed, sugar or sugar concentrate must be added. Check if the set temperature is too lower.
Need help?
Do you have a question about the XN240A and is the answer not in the manual?
Questions and answers