Page 1
Technical Support and E-Warranty Certificate www.vevor.com/support COMMERCIAL SLICER MODEL: 1A-FS201Q We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
Page 3
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
Warning-To reduce the risk of injury, user must read instructions manual carefully. This product is subject to the provision of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol.
Page 5
directly on the plug - never pull the plug out using the power cord. 4.Indoor use only. Never allow this device to be exposed to rain or moisture. Do not submerge the appliance in water for any reason. If the device should fall into water, ensure the device is disconnected from a power source, then and only then, remove the device from the water.
Children should be supervised to ensure that they do not play with the appliance. 20.Children shall not play with the appliance. The slicer is not a toy. SAVE THESE INSTRUCTIONS Specification Data Model No. Power Supply Power Blade Size 1A-FS201Q-UL 120V, 60Hz 180W 7.5’’ (190mm) 1A-FS201Q-GS 220V, 50Hz 180W 7.5’’ (190mm) OPERATION WARNING! The appliance is suitable for a short time operation only.
Note: During breaks from slicing, set the on/off switch to position O and wait until the cutting blade comes to a complete standstill. Before First Use Carefully, take the slicer out of its packaging. Remove all the packaging material and keep it together with the packaging. Clean the slicer before it comes into contact with any food.
Operating the slicer Switch the power to “ON” to power up the slicer. Ensure you do not operate for more than 10 minutes continuously. During breaks from slicing, move the switch quickly to the “OFF” position and wait until the cutting blade comes to a complete standstill. The slice thickness can be set between 0 and approximately 15mm.
• Clean the inside and outside of the appliance with a soft damp cloth. Wipe with a dry soft cloth. • Clean the cutting blade and food holder with a soft sponge in warm, soapy water. Wipe with a dry soft cloth. •...
CORRECT DISPOSAL This product is subject to the provision of european Directive 2012/19/EU. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products marked as such may not be discarded with normal domestic waste, but must be taken to acollection point for recycling electrical and electronic devices.
Page 16
Technical Support and E-Warranty Certificate www.vevor.com/support...
Need help?
Do you have a question about the 1A-FS201Q and is the answer not in the manual?
Questions and answers