PowerTec 71653 Instruction Sheet

INSTRUCTION SHEET
Self-Centering Shelf Bit Jig
QUESTION...
1•847•780•6120
PACKAGING CONTENTS
1 - Multi-Position Drilling Template
1 - Template Handle
3 - Template Handle Assembly Pins
1 - Self-Centering Bit 1/4" (71653) 5 mm (71654)
Figure 1
Template
Handle
The self-centering shelf bit jig spaces shelf
pin holes 1-1/4" (32 mm) apart and 1-7/16"
(37 mm) or 2-1/2" (64 mm) from the edge of
the cabinet frame. It can be used for both face
frame and frameless applications. These holes
can be used with 1/4" (71653) or 5 mm (71654)
shelf pins.
NOTE: The self-centering shelf pin bit is
designed to stop at a set depth. This depth
is reached when the internal spring is fully
compressed. Before drilling into a workpiece, it
is recommended that you practice on a scrap
board to get the feel of the bit.
WARNING
This product contains one or more chemicals
known to the State of California to cause cancer
and birth defects or other reproductive harm.
Wash hands after handling.
Multi-Position
Drilling Template
Template Handle
Assembly Pins
Self-Centering Bit
TO USE
1. Select the setback application for your
project, see Figure 2.
2. Attach the template handle to the correct
edge of the multi-position drilling template
for your project, see Figure 2 and 3.
Figure 2
1-7/16" (37 mm) Setback Applications
Frame
1-7/16"
(37 mm)
FOR 1-7/16"
(37 mm)
Face Frame
Application
2-1/2" (64 mm) Setback Applications
Frame
2-1/2"
(64 mm)
FOR
2-1/2"
(64 mm)
Face Frame
Application
MODEL NO. 71653
71654
1-7/16"
(37 mm)
FOR
1-7/16"
(37 mm)
Frameless
Application
2-1/2"
(64 mm)
FOR
2-1/2"
(64 mm)
Frameless
Application
19-0501