Linking Parameters To Midi Continuous Controllers; Maximum Links Per Program; Linked Parameter Example - DigiTech Artist GSP-2101 Owner's Manual

• With the cursor still under the DEVICE number, use the Data wheel to select the
MIDI channel you want the device to respond to (if this Parameter is set to DIS-
ABLED, the GSP-2101 Artist will not send out any Program Change messages for
that device).
• Press Function key [2]. The cursor appears under the GSP PROGRAM number on the
second line of the display. The second and third lines of the display tell you that when
the GSP-2101 Artist receives Program Change number 1, device 1 will be sent
Program change number 1 on its designated MIDI channel.
• Using the Data wheel, select the GSP-2101 Artist Program number (1-240) that will
send the mapped Program Change to the external device. When you're finished, press
Function key [3] once.
• The cursor appears under SEND AS 1. This Parameter determines the Program
Change number that the external device will receive when the appropriate Program
Change number is received on the GSP-2101 Artist. Select the Program Change
number that will be sent (1-128) using the Data wheel.
You can map up to 4 devices and as many incoming Program Change messages as you like.
These are stored in memory automatically, and are always active until you change them or until
a factory reset is performed.
L P
INKING ARAMETERS TO
Linking Parameters to external controllers has been specially designed to be extremely fast and
simple. Up to 10 Parameters can be linked for each Program in the GSP-2101 Artist. This
means that an external MIDI controller like the DigiTech MC
sends MIDI Continuous Controller data) or a MIDI sequencer can control the GSP 2101 Artist
in real-time applications.
For instance, these links could be used to control chorus level, sweeping from moderate to deep.
Let's link MIDI Continuous Controller #7 (which set aside in MIDI world as a volume control)
to a Parameter item. To link a Parameter to a MIDI CC, do the following:
• From Program's Title screen, use the [NEXT]/[PREV] keys to select the Parameter you
want to link to a MIDI continuous controller (let's use Stereo Chorus Level from our
example).
• When you have selected the Parameter you want to link, enter the LINK setup menu
by pressing and holding the [MIDI] key.
• When you release the key, the display looks something like this:
GSP-2101 Artist Owner's Manual
Section 5 - The GSP-2101 and MIDI
C C
ONTINUOUS
¡Link:2
SCho Level
is not linked
≤ ≥"
ONTROLLERS
2
MIDI Expression Pedal (which
65