DigiTech Artist GSP-2101 Owner's Manual page 76

Section 6 - The GSP-2101 and the Control One
• Press one of the ten Patch footswitches or move the Expression pedal to Link that
Parameter. If you choose a footswitch that is already assigned to do something else
(besides select a Program), the display will read:
Pressing Function button [1] re-assign the function of the footswitch, while pressing
[2] leaves everything as it was, aborting the procedure. Press Yes. The display reads:
• Press Function button [2] to set the min/max values. The display reads:
In this example, we want to kick up the volume 3dB when we hit the footswitch. Setting the
min value to 0 and the max value to 3 will make this happen. Press the [Link] button to exit.
The second method of assigning a Parameter to the Control one involves a few more steps but
allows you more flexibility in your set-up. It also gives you the opportunity to delete other links,
and get a feel for what all the links are doing in the current Program. The following is a example
of the extended set up procedure:
• Be sure that that the Parameter you want to link is displayed and selected (below is an
example Master Volume):
• Press and hold the [MIDI] button until the display reads:
• After releasing the [MIDI] button, the display reads:
•Use the Data Wheel to select the pedal to be used, the display reads:
74
Do you want to
re-assign this
foot switch ?
¡Yes ™No
¡Link:2 ™Min/Max
MVol MVol Links
to Foot Switch 1
£Delete Link ≤ ≥
¡MVol MVol Links
to Foot Switch 1
™Min Value -16
£Max Value 15
Master Volume
Distortion On
0 dB
Low <<>> High
Assigning CC/FS
¡Link:2
MVol MVol
is not Linked
≤ ≥
GSP-2101 Artist Owner's Manual