Deleting Algorithms; Move Modules/Switch S-Discs (Ppc-210 Users Only) - DigiTech Artist GSP-2101 Owner's Manual

• Press the [DELETE] key. The display reads:
• To delete the Algorithm from memory, press Function key [1]. The display briefly
reads:
• To delete the Algorithm from memory, press Function key [1]. The display briefly
reads:
after which you'll be returned to the current Program. To abort the command, press
Function key [2].
Move Modules / Switch S-DISC™ (PPC-210 users only)
The Move and Switch options are found in the SHOW ALG section of Edit mode, and they
allow you to rearrange the Modules in an Algorithm quickly. The Move option allows you to
rearrange the order of the Modules on the screen. Reasons you might want to shuffle Modules
around are:
1. So that Modules appear on the display in a more logical order that reflects the way
they will be linked.
2. To assist AutoLink™ in generating more accurate routings for your Algorithm.
To change a Module's location in the Algorithm list, do the following:
• After entering Edit mode, the display should read:
• Press Function key [1] to show the contents of the Algorithm. The display looks some-
thing like this:
Note that a cursor appears under the first Module.
GSP-2101 Artist Owner's Manual
Delete Algorithm:
Yes No Edit
¡ ™ £
Progs using Alg will
be lost, You Sure ?
Yes No
¡ ™
**** DELETING ****
**** ALGORITHM ****
Select effect to ADD
And Then Press Enter
Link When Done
¡Show Alg £Exit
î4PCho 2x1
ˆ6x2 4TDly2 5x2 Pch
Move Switch Exit
Section 4 - Algorithm Usage
53