Effects And Parameters; Signal Path; Compressor; Mic Pre/Voice - DigiTech VOCAL 300 User Manual

Effects and Parameters

Signal Path

Compressor

The compressor module is used to control the dynamics of varying signal
strengths.
On/Off - Rotate the LOW knob to turn the effect on and off.
Type - Rotate the MIDRANGE knob to select the type of compression to be
used, Low, Medium or High.
Gain - Rotate the MIDRANGE knob to increase the compressor's output gain.

Mic Pre/Voice

This module selects various mic preamp and voice character types. Tube Pre is a
warm professional mic preamp type for standard vocal usage. Overdrive and
Grunge are cutting edge distortion preamp types. The other 9 voice characters
produce wild and unnatural vocal sounds.
Voice - Rotate the LOW knob to select a vocal character. Voice types are:Tube
Pre, Overdrive, Grunge, Dark Side, Monster, Chipmunk, Lunar, Lo-Fi,
Robot,Wizard, Alien, and Telephone.
Parameter 1 – Rotate the MIDRANGE knob to adjust the first parameter of
Parameter 2 – Rotate the HIGH knob to adjust the second parameter of the
Level - Rotate the MASTER LEVEL knob to controls the preset level for the
selected model.

Voice Parameters

Character
Tube Pre
Overdrive
8
Input Level
Volume
Noise Gate
Pedal - Pre
the Voice type selected. (see Voice Parameter chart following
these instructions)
Voice type selected. (see Voice Parameter chart following these
instructions)
Param 1
Gain
Gain
Compressor
Effects Delay
Display Param 2
De-Esser
De-Esser
Mic Pre / Voice Equalizer
Volume
Reverb
Pedal - Post
Display