Flanger; Phaser - DigiTech GNX3 User Manual

Genetx guitar workstation
Table of Contents

Advertisement

Effects and Parameters
A Chorus adds a short delay to your signal.The delayed signal is modulated in and out of tune and
then mixed back with the original signal to create a thicker sound.
Parameter 1 - The Parameter 2 knob adjusts the rate (
* These Parameters are only available using the GenEdit™ computer editor software.
Parameter 2 - The Parameter 3 knob adjusts the intensity (
Parameter 3 - The Parameter 4 knob adjusts the PreDelay (
* Parameter 4 - Selects the waveform used by the Chorus.Waveforms include: Triangle , Sine, and
* Parameter 5 - Adjusts the left to right balance of the wet signal. Ranges from L 99 to R 99.
Mod Level - The Parameter 5 knob controls the level (

Flanger

A Flanger uses the same principle as a Chorus but has a shorter delay time and adds regeneration (or
repeats) to the modulating delay. This results in an exaggerated up and down sweeping motion to the
effect.
Parameter 1 - The Parameter 2 knob adjusts the rate (
Parameter 2 - The Parameter 3 knob adjusts the intensity (
Parameter 3 - The Parameter 4 knob adjusts the amount of feedback (
* Parameter 4 - Selects the waveform used by the Flanger.Waveforms include: Triangle , Sine, and
* These Parameters are only available using the G
* Parameter 5 - Adjusts the left to right balance of the wet signal. Ranges from L 99 to R 99.
Mod Mix - The Parameter 5 knob controls the mix (
(all dry) to 99 (all wet).

Phaser

A Phaser splits the incoming signal, takes the split signal in and out of phase and mixes it back in with
the original signal. As the phasing changes, different frequencies are canceled resulting in a warm sort
of twisting sound.
Parameter 1 - The Parameter 2 knob adjusts the rate (
Parameter 2 - The Parameter 3 knob adjusts the intensity (
Parameter 3 - The Parameter 4 knob adjusts the amount of effected signal returned to the input of
* Parameter 4 - Selects the waveform used by the Phaser.Waveforms include: Triangle , Sine, and
* Parameter 5 - Adjusts the left to right balance of the wet signal. Ranges from L 99 to R 99.
24
99.
1 to 99.
Chorus effect is applied to the input signal. Ranges from 1 to 20.
Square.
99.
99.
1 to 99.
delay. Ranges from 0 to 99.
Square.
from 1 to 99.
1 to 99.
Regen
the Phaser (
). Ranges from 0 to 99.
Square.
Speed
) of the modulation. Ranges from 1 to
Depth
) of the modulation. Ranges from
PREDeLaY
) or length of time before the
mod levl
) of the Chorus. Ranges from 0 to
Speed
) of the modulation. Ranges from 1 to
Depth
) of the Modulation. Ranges from
Regen
E
™ computer editor software.
EN
DIT
mod mix
) of wet and dry signal. Ranges from 0
Speed
) of the modulating phase. Ranges
Depth
) of the modulation. Ranges from
) added to the Flanger

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents