Flanger; Phaser - DigiTech RP150 User Manual

Flanger (FL)
A Flanger uses the same principle as a Chorus but uses a shorter delay time and adds regeneration
(or repeats) to the modulating delay. This results in an exaggerated up and down sweeping motion
to the effect. The RP150 includes the following Flanger Effect models: fL (the DigiTech Flanger),
and mx (based on an MXR
Knobs 2, 3, and 4 have the following functions for the Flanger models:

Flanger

Model
fl
mx
Phaser (PH)
A phaser splits the incoming signal, and then changes the phasing of the signal. This signal is then
taken in and out of phase and mixed back in with the original signal. As the phasing changes, differ-
ent frequencies get canceled resulting in a warm sort of twisting sound.
Knobs 2, 3, and 4 have the following functions:
Speed - Knob 2 adjusts the rate (Speed) of the modulation. Ranges from 0 to 99.
Depth - Knob 3 adjusts the Depth of the modulation. Ranges from 0 to 99.
Regeneration - Knob 4 controls the regeneration of the effect. Ranges from 0 to 99.
Waveform (X-Edit
Level (X-Edit only) - Controls the level of the effect. Ranges from 0 to 99.
28
Flanger).
®
Knob 2 Knob 3
(Speed) (Depth)
Speed Depth
Speed Width
only) - Selects a waveform: tr, Si, or Sq (Triangle, Sine, or Square).
TM
Knob 4 P5
(Regen) (X-Edit
only)
Regen Waveform
Regen Manual
P6
(X-Edit
TM
only)
Level
--