Talker; Stomp Box Modeling - DigiTech GNX3 User Manual

Effects and Parameters

Talker™

The Talker™ is an effect designed exclusively by DigiTech, that lets your instrument speak. The
Talker™ requires a microphone be connected to the Mic Input on the rear panel of the GNX3. As
you speak into the microphone, your instrument mimics what you say. The Talker™ effect is output
only at the 1/4" left and right outputs. When the Talker™ is bypassed, the mic signal is passed from
the XLR mic input to the XLR mic output unaffected. There are five Talker™ types.
Type - The Parameter 4 knob is used to select the 5 Talker™ types. Talker types range from
talker
Sensitivity - The Parameter 2 knob adjusts the microphone sensitivity. The input level from your

Stomp Box Modeling

The GNX3 Stomp Box Modeling emulates the tones of the most popular distortion boxes ever used
including the DOD OD250, Boss DS-1, Arbiter Fuzz Face, Electro Harmonix Big Muff, ProCo RAT, DOD
Grunge, Boss Metal Zone, Ibanez TS-9,Voodoo Labs Sparkle Drive, and the Guyatone OD-2*.
*Arbiter, Boss, Electro-Harmonix, ProCo, Ibanez,Voodoo Labs, Guyatone, DS-1, Fuzz Face, Big Muff, RAT, Metal Zone,TS-9, Sparkle Drive, and
OD-2 are trademarks of their respective companies and are in no way associated with DigiTech
Stomp Box On/Off - The STATUS button turns the Stomp Box (
Stomp Box Type - The Parameter 1 knob selects the type of stomp box to be used. Choices include:
Screamer
- Based on an Ibanez TS-9
Fuzzy
- Based on an Arbiter Fuzz Face
DOD 250
- Based on a DOD Overdrive 250
Grunge
- Based on a DOD Grunge™.
DS Dist
- Based on a Boss DS-1.
Type
Screamer
Rodent
DS Dist
DOD 250
Big MP
Guy OD
Sparkdrv
Grunge
Fuzzy
Zone
Gain - Controls the amount of distortion or gain in the Stompbox model. Range is 0-99
Param1 - A tone control for the Stompbox model. Range is 0-99
Param2 - A second Tone control for the Stompbox model (not available in all models). Range is 0-99
*Param3 - Controls the Mid Frequency in the Zone stompbox model. Range is 0-99
*Param4 - Controls the Mid Level in the Zone stompbox model. Range is 0-99
Level - Controls the output level of the Stompbox model. Range is 0-99
* These Parameters are only available using the G
EQ
22
1 (deep tonal characteristics), to
microphone must be loud enough for the Talker™ to work properly. If the
microphone input is too weak, the Talker™ will have trouble tracking. If the input is
too strong, the Talker™ will clip making the words unintelligible.The Mic Sensitivity
ranges are from 1 (least sensitive) to 99 (most sensitive).
Gain Param1
drive tone
dist filter
dist tone
gain
sustain tone
drive
gain tone
grnggain butt
fuzz
dist mid freq
talker 5 (bright tonal characteristics).
Big MP
- Based on the Electro Harmonix Big Muff Pi.
Guy OD
- Based on a GuyaTone OD-2
Rodent
- Based on a Rat distortion
SprkDriv
- Based on a Voodoo Labs SparkleDrive.
Zone
- Based on a Boss Metal Zone.
Param2 Param3* Param4* Level
clean
face
mid lvl low
E ™ computer editor software.
EN DIT
Stompbox
) Modeling on and off.
level
volume
level
level
volume
level
volume
loud
volume
high level