Select The Pickup Type; Turn The Compressor Off; Turn The Whammy™/Ips/Talker™ Off; Turn The Stompbox Modeling Off - DigiTech GNX3 User Manual

Genetx guitar workstation

Table of Contents

Tutorial

Select the Pickup Type

In our example preset we use a single coil pickup, but want it to sound like a double coil humbucker.

With the Wah-Pickup LED lit, rotate the Parameter 4 knob until the display reads

makes a single coil sound like a Humbucker.

We don't use compression in our preset so, we need to turn the compressor off. To turn the

compressor off, do the following:

1. Press the EFFECT SELECT DOWN button. The Compression LED lights and the display

shows the current status of the Compressor.

2. If the Compressor is on, press the STATUS button until the red display reads off (Of).

Turn the Whammy™/IPS/Talker™ Off

We don't want Whammy™, IPS, or Talker™ effects in this preset. To turn these effects off, do the

following:

1. Press the EFFECT SELECT DOWN button, and the Whammy/IPS/Talker™ LED is lit.

2. If the display indicates that either one of these effects is active, press the STATUS button until the

display reads off (Of).

To turn the Stompbox Modeling off for this preset, do the following:

1. Press the EFFECT SELECT DOWN button until the Stompbox LED is lit.

2. If the display indicates that it is active, press the STATUS button until the display reads off (Of).

Adjust the EQ

The EQ for both the Acoustic Model (Green Channel) and the Rectweed HyperModel™ ( Red

SC>Humb

. This

Table of Contents

Show Quick Links

Table of Contents