Triggered Flanger; Triggered Phaser; Tremolo; Panner - DigiTech GNX3 User Manual

Mod Mix - The Parameter 5 knob controls the mix (
(all dry) to 99 (all wet).
* These Parameters are only available using the G

Triggered Flanger

A Triggered Flanger is the same sound as a regular Flanger but it lets you choose the starting point of
the Flanger sweep. With a regular Flanger, the low frequency oscillator (LFO) is continually sweeping
up and down. Therefore, when you begin to play, the flanger may be at the top, bottom, or any
random point of the sweep. With a Triggered Flanger, every time the signal exceeds the Sensitivity
level setting, the Flanger begins at the LFO Start Parameter.
Parameter 1 - The Parameter 2 knob adjusts the rate (
Parameter 2 - The Parameter 3 knob adjusts the strength the signal must be (
Parameter 3 - The Parameter 4 knob selects the Flanger sweep starting point (
Mod Mix - The Parameter 5 knob controls the mix (
(all dry) to 99 (all wet).

Triggered Phaser

A Triggered Phaser is the same sound as a regular Phaser but it lets you choose the starting point of
the Phaser sweep. In a regular Phaser, the low frequency oscillator (LFO) is continually changing the
phase of the signal. Therefore, when you begin to play, the phaser may be at any random point of the
phase. With a Triggered Phaser, every time the signal exceeds the Sensitivity level setting, the Phaser
begins at the LFO Start Parameter.
Parameter 1 - The Parameter 2 knob adjusts the rate (
Parameter 2 - The Parameter 3 knob adjusts the strength the signal must be (
Parameter 3 - The Parameter 4 knob selects the Phaser sweep starting point (
Mod Mix - The Parameter 5 knob controls the mix (
(all dry) to 99 (all wet).

Tremolo

A Tremolo effect modulates the volume of the signal at an even rate.
Parameter 1 - The Parameter 2 knob adjusts the rate (
Parameter 2 - The Parameter 3 knob adjusts the intensity (
Parameter 3 - The Parameter 4 knob selects the type of wave form the modulation uses. Choices
The Parameter 5 knob does not function when the Tremolo is selected.
* These Parameters are only available using the G

Panner

99.
to trigger the Flanger. Ranges from 1 (strong signals) to 99 (weak signals).
from 0 to 99.
from 1 to 99.
to trigger the Phaser. Ranges from 1 (strong signals) to 99 (weak signals).
from 0 to 99.
Ranges from 1 to 99.
Ranges from 0 to 99.
include:Triangle , Sine, and Square.
Effects and Parameters
mod mix
) of wet and dry signal. Ranges from 0
E ™ computer editor software.
EN DIT
Speed
) of the modulation. Ranges from 1 to
mod mix
) of wet and dry signal. Ranges from 0
Speed
) of the modulating phase. Ranges
mod mix
) of wet and dry signal. Ranges from 0
Speed
) at which the volume modulates.
Depth
) of the modulating volume.
E ™ computer editor software.
EN DIT
senstvty
) in order
LFO STrt
). Ranges
senstvty
) in order
LFO STrt
). Ranges
25