Table of Contents
Advertisement
RP14 UserÕs Guide
The RP14D offers a chorus that is unique in both character and sound. A Chorus adds a short delay to your signal and modulates the delay
time which takes the delayed signal slightly in and out of tune. The delayed signal is then mixed back with the original signal to create a
thicker texture as if two guitars were playing the same part. This RP14D's chorus offers exceptionally rich chorusing using dual voices.
Chorus Parameters are as follows:
Speed
Depth
The RP14D offers an exceptionally rich studio-quality flanger. A Flanger uses the same principle as a Chorus does with a modulating delay.
The difference being that a Flanger uses a shorter delay time and adds regeneration or repeats to the modulating delay. This results in an
exaggerated up and down sweeping motion to the effect. Flange Parameters are as follows:
Speed
Depth
Regeneration
*
Note: These Parameters can be assigned to the Expression Pedal. See page 11 for more information on Expression Pedal
assignments.
14
Section Three - Effects and Parameters
Chor (Chorus)
Parameters
Displayed Values
0 . . . 1 0 0
Speed *
0 . . . 1 0 0
Depth *
Controls the rate that the Chorus modulates at. Ranges from 0 to 100.
Sets the amount of intensity in the Chorus. Ranges from 0 to 100.
FLAn (Flanger)
Parameters
Displayed Values
0 . . . 1 0 0
Speed *
1 . . . 1 6
Depth
- 99. . . 0 . . . 99
Regeneration *
Controls the rate that the Flange modulates at. Ranges from 0 to 100.
Sets the intensity in the Flange effect. Ranges from 1 to 16.
This Parameter sets the amount of regeneration which is perceived as the up and down motion of the
Flange. Variable in positive and negative phasing from -99 to 99.
PHAs (Phaser)
Parameters
Displayed Values
0 . . . 1 0 0
Speed *
0 . . . 1 0 0
Depth *
0 . . . 99
Regeneration *
Hide quick links:
Advertisement
Table of Contents
